国产午夜精品福利,99超碰在线观看超碰在线观看,点击进入av毛片在线,青青草欧美,夜夜操b天天干天天操天天,日日摸夜夜天堂五月亚洲,亚州精品国产三级

客戶榮譽
kehury
技術文章
  • 普洱PPC4E Gas Pressure Controller Kits 6242
  • 二氧化碳檢測儀的保養與維護
  • 精密電子天平維護與保養方法
  • 水中溶解氧測定的目的和意義
  • 使用便攜式氣體檢測儀時注意事項
  • 萬用表在家電維修中的使用
  • 遠紅外成像技術在鄒縣發電廠的應用
  • 光纖傳感器的基本工作原理
  • 熱電偶種類及其工作原理
  • 維氏硬度計的適用場合
  • 當前位置:首頁 > 普洱儀器儀表 > 普洱電子電工 > 普洱計量校準
    PPC4E Gas Pressure Controller Kits
    型 號:6242
    品 牌:美國福祿克FLUKE
    技術指標:Power requirements
    100 to 240 V ac (-15%, +10%), 50-60 Hz, 70 VA max consumption
    普洱PPC4E Gas Pressure Controller Kits-6242-美國福祿克FLUKE

    A simple, complete gas calibration solution

    Fluke Calibration 6241 and 6242 PPC4E gas pressure controller kits feature PPC4E models to cover a very wide workload combined with the accessories needed for a complete calibration system. Included is the Fluke Calibration SPLT self-purging liquid trap to capture moisture in the test line and automatically purge to prevent contamination of the PPC4E, preventing errors and protecting your investment. Also included is interconnect hardware and a test station with a quick connect fitting to mount your pressure device to be tested. 6241 and 6242 kits provide the hardware for a complete gas calibration system.

    ·         Precise pressure measurement and automated control, with ranges available from ± 15 kPa to 14 MPa (± 2.2 psi to 2,000 psi)

    ·         Gauge, absolute and negative gauge (vacuum) modes included on most models

    ·         Switch between absolute, gauge and bidirectional gauge modes and meet easy-to-understand full-year measurement specifications without added hardware or special calibration or maintenance operations

    ·         ± 0.02 % one-year accuracy of any selected Autorange span, with Autorange span as low as 1 % of device full scale. Up to 100:1 accurate ± 0.02 % measure and control range turndown can truly be realized by a single calibrator

    ·         Self-purging liquid trap included to automatically protect PPC4E from system contamination

    ·         AutoTest™, AutoRange, ready/not ready indicator, set point jog feature, real-time measurement uncertainty display, RS-232 and IEEE-488.2 remote interfaces and other advanced features to automate, simplify testing, improve safety and prevent calibration errors and damage to equipment

    ·         Quick connect test stand and interconnect to connect to the device under test

    ·         Standard color graphical user interface with full support in 11 languages

    Outstanding, wide-range performance in a single instrument

    The Fluke Calibration PPC4E is the latest member of our PPC family of controller/ calibrators to deliver extremely broad pressure range coverage at a level of performance that addresses your most common calibration workload. Calibrate transmitters, transducers, pressure switches, indicators, barometers and analog and digital gauges with ease using the color graphical user interface and advanced features.

    PPC4E nominal measurement uncertainty is ± 0.02 % of AutoRanged span. The AutoRange feature allows you to quickly and easily align PPC4E performance to match your requirements exactly. Are you trying to decide if you can provide the best coverage if you buy a 300 psi or a 160 psi calibrator? What if you later need to calibrate a 200 psi device? With PPC4E it doesn’t matter—accuracy is based on any AutoRanged span you enter, as long as it is within the instrument’s turndown range:

    ·         PPC4E models, 10:1 turndown (0.02 % of any AutoRanged span down to 10 % of PPC4E full scale pressure span)

    ·         PPC4EX models, 100:1 turndown (0.02 % of any AutoRanged span down to 1 % of PPC4E full scale pressure span)

    What if you receive a barometer for calibration? …or a vacuum gauge? PPC4E is still the right tool. All models (except for PPC4E 15K) include absolute pressure and negative gauge (vacuum) capabilities. Some PPC4E models also provide excellent coverage of draft pressure (inches of water, mbar) ranges. With multiple pressure modes and very wide turndown capabilities, one PPC4E controller can effectively replace multiple controllers, calibrators or even gas deadweight testers and deadweight ball gauges. Move up to the well-known reliability and precision of a Fluke Calibration PPC4E pressure controller and enjoy great value and return on investment.

    General Specifications

    Warm up time

    None required, 30 minute temperature stabilization recommended for best performance from cold power up

    Resolution

    To 1 ppm, user adjustable

    Power requirements

    100 to 240 V ac (-15%, +10%), 50-60 Hz, 70 VA max consumption

    Operating temperature range

    10 to 40 °C

    Weight

    16.6 kg (36.5 lb)

    Dimensions

    19 cm H x 35 cm W x 45 cm D (7.5 in. x 13.8 in. x 17.7 in.)

    Remote communication interfaces

    RS232 (COM1, COM2), IEEE-488.2, USB (front panel, firmware load only)

    Operating medium

    Any clean, dry, non-corrosive gas

    Pressure connections

    TEST (+), TEST (-):

    1/8 in. NPT F

    SUPPLY:

    1/8 in. NPT F

    EXHAUST:

    3/8 in. NPT F

    ATM:

    10-32 UNF


    PPC4E measurement uncertainty (includes precision and one year stability)1,2

    PPC4EX 14M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 140

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.1
    Minimum AutoRanged span [kPa]2: 140

    PPC4E 14M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 1400
    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 1
    Minimum AutoRanged span [kPa]2: 1400

    PPC4EX 7M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 70

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.05
    Minimum AutoRanged span [kPa]2: 70

    PPC4E 7M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 700

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.5
    Minimum AutoRanged span [kPa]2: 700

    PPC4EX 1.4M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 14

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.014
    Minimum AutoRanged span [kPa]2: 70

    PPC4E 1.4M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 140

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.1
    Minimum AutoRanged span [kPa]2: 140

    PPC4EX 100K

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: ± 1

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.014
    Minimum AutoRanged span [kPa]2:70

    PPC4E 100K

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: ± 10

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.014
    Minimum AutoRanged span [kPa]2: 70

    PPC4E 15K

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: ± 1.5

    1.     Maximum deviation of the RPT indication from the true value of applied pressure including precision, predicted one year stability limit, temperature effect and calibration uncertainty, combined and expanded (k=2) following the ISO “Guide to the Expression of Uncertainty in Measurement."

    2.     For AutoRange spans below the Minimum AutoRanged span uncertainty is equal to the value at the Minimum AutoRanged span.

    3.     Gauge uncertainty is a % of AutoRanged span. For example, an AutoRanged span of 3 500 kPa on model PPC4E 7M would have uncertainty of (0.02% * 3 500 kPa) = 0.35 kPa.

    4.     Absolute uncertainty is the sum of a % of AutoRanged span and a Constant that accounts for zero drift. For example, an AutoRanged span of 80 kPa on model PPC4EX 100K would have uncertainty of (0.02% * 80 kPa + 0.014 kPa) = 0.03 kPa.

    On-board barometer

    The on-board barometer is used only to measure changes in atmospheric pressure to provide dynamic compensation of an absolute RPT’s atmospheric pressure offset in gauge measurement mode with PPC4E models other than PPC4E 15k.

    On-board barometer

    Warm up time

    None required

    Range

    70 to 110 kPa (10 to 16 psi)

    Resolution

    0.001 % of span

    Precision
    Predicted stability

    0.1 % of span
    0.05 kPa/yr (0.008 psi/yr)


    Pressure control specifications

    Control precision

    PPC4E:
    ±0.0006% of controller span

    PPC4EX:
    ±0.0006% of controller span (AutoRanged span >10% of controller span)
    ±0.00006% of controller span (AutoRanged span ≤10% of controller span)

    Lowest controllable pressure
    (gauge mode)

    Zero set by automated venting. Lowest point above or below zero limited only by RPT resolution and control precision.

    Lowest controllable pressure
    (absolute, negative gauge modes)

    1 kPa absolute (0.15 psia) or gauge equivalent, for all models except PPC4E 7M and PPC4E 14M

    3.5 kPa(0.5 psia) for PPC4E 7M

    7 kPa(1 psia) for PPC4E 14M

    Ultimate pressure
    (absolute, negative gauge)
    Depending on vacuum pump and connections

    200 to 700 Pa absolute(2 to 7 mbar, 0.03 to 0.1 psia) or gauge equivalent

    Typical pressure setting ready time
    (0.005% hold limit, 50 cc test volume)

    15 to 30 s

    Slew time
    (ATM to FS with 50 cc test volume)

    30 s

    Typical test volume

    0 to 1000 cc for Controller Range of 1.4 MPa
    [300 psi] or less
    0 to 500 cc for Controller Range greater than 1.4 MPa [300 psi]

    Default dynamic control hold limit

    ± 0.01 % of current range

     

    型號

    描述

    6241-15K

    PPC4E Gas Pressure Controller Kit with PPC4E 15K, ± 1.5 to ± 15 kPa (± 0.2 to ± 2.2 psi) 

    Includes:

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6241-100K

    PPC4E Gas Pressure Controller Kit with PPC4E 100K, ± 10 to ± 100 kPa (± 1.5 to ± 15 psi)

    Includes: 

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6241-1.4M

    PPC4E Gas Pressure Controller Kit with PPC4E 1.4M, 140 to 1,400 kpa (20 to 200 psi)

    Includes: 

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6241-7M

    PPC4E Gas Pressure Controller Kit with PPC4E 7M, 700 to 7,000 kPa (100 to 1,000 psi)

    Includes: 

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

    6242-100K

    PPC4E Gas Pressure Controller Kit with PPC4EX 100K, ± 1 to ± 100 kPa (± 0.15 to ± 15 psi)

    Includes: 

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6242-1.4M

    PPC4E Gas Pressure Controller Kit with PPC4EX 1.4M, 14 to 1,400 kpa (2 to 200 psi)

    Includes: 

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6242-7M

    PPC4E Gas Pressure Controller Kit with PPC4EX 7M, 70 to 7,000 kPa (10 to 1,000 psi)

    Includes: 

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6242-14M

    PPC4E Gas Pressure Controller Kit with PPC4EX 14M, 140 to 14,000 kPa (20 to 2,000 psi)

    Includes: 

    ·        PPC4E pressure controller/calibrator with power line cords and operating manual

    ·        SPLT self-purging liquid trap with connector to PPC4E

    ·        Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    通用配件:


    配件

    描述

    Case

    加固且可重復使用的模制裝運外殼(部件號3338097)

    機架安裝套件

    標準19in機架安裝工具機架

    PK-PPC-BG-DVU

    BG15K Q-RPT用雙倍容積單元(部件號3070389)

    真空參考套件,,220V

    用于PPC EXHAUST端口的真空泵套件包括連接器(部件號3584486)

    COMPASS for Pressure

    自動執行測試、數據采集、報告與設備資產管理的軟件

    RS232

    9針線,,2m,,用于PPC4E COM1(部件號2758335)

     


            福禄克公司成立于1948年,是世界电子测试工具的领导者,多年来,创造和发展了一个特定的技术市场,为各个工业领域提供了优质的测量和检测故障产品。福禄克的用户涵盖面广,包括技术人员、工程师、计量人员等等,他们利用福禄克的测试工具进行工业用电、电器设备和过程校准的安装、故障诊断和管理,并以此控制质量。从工业控制系统的安装调试到过程仪表的校验维护,从实验室精密测量到计算机网络的故障诊断,福禄克的产品帮助各行各业的业务高效运转和不断发展。在过去的五年中,福禄克的测试工具更是屡获殊荣,赢得了《测试与测量世界》最佳测试工具奖、《控制工程》工程师选择奖等50多个年度产品奖项,以其精准、耐用、安全、创新的特性而备受全球用户赞誉。

    閹劍妲搁崥锔藉韫囧啴鈧鐎烽柨娆掝嚖鐎佃壈鍤ч弮鐘崇《娴h法鏁ら敍锟�

    閹劍妲搁崥锔藉韫囧啩鍗庨崳銊ㄥ窛闁插繋绗夋担瀹犫偓宀勨偓鈧幑銏f彛闁參浜fス鑽ゅ劜閿涳拷

    閹劍妲搁崥锔藉韫囧啩鍗庨崳銊ゅ▏閻€劋绨℃稉宥夋毐閻ㄥ嫭妞傞梻鏉戞皑閺冪姵纭剁紒褏鐢绘担璺ㄦ暏閼板矁顩﹂崣锕€顦婚幎鏇$カ鐠愵厺鎷遍敍锟�

    娑撴粍鏌熼崲澶夊崕閻欘剙顔嶉幓鎰返100%闂嗗爼顥撻梽鈺傚鐠囩尨绱濇穱婵婄槈鐠愵厺鎷遍崥搴濈瑝濠娾剝鍓伴崗宥堝瀭闁偓閹广垼鎻i妴鍌氬涧鐟曚線鈧俺绻冮幋鎴滄粦閻ㄥ嫰鏀㈤崬顔绘眽閸涙ǹ绻樼悰灞界€烽崣椋庢畱闁瀚ㄩ敍灞肩閺冿箒鍠樻稊鏉挎倵娴h法鏁ゆ稉宥嗗姬閹板骏绱濋幋鎴滄粦鐏忓棛鐝涢崡铏¥閺夆€叉娴滃牅浜掗幑銏f彛閿涘本鍨�100%閸忋劑顤傞柅鈧潻妯挎彛濞嗕勘鈧拷

    闁崇厧娲g粭銏ゅ棘閻熺増顫嶅ù鐙€浜濋崹姘辩博鐎b晝鑹�2003妤犵偠鎻槐婵囩▔閺勫浚娲eù鐘茬凹缁ㄣ劌顔忛妷銈囩懝婵☆偀鍋撴繛鏉戭儎閸楀酣宕抽妸褏鍩¢柛娆愬灩閺佹挻绂嶈閹蜂即鏌ㄩ埀顒勫船椤曞棛绀夐柟缁樺姃缁跺灚绂掗鍕彜闂侇偄顦悗锟�+闂佹澘绉归埀顒婃嫹+閻庣懓顦抽ˉ濠勬嫬閸愵厾妲�+闁糕晝顢婇鍕嫉瀹ュ懎顫ら柕鍡嫹

    闁崇厧娲ら崙锟犲嫉閿燂拷2濞戞挸娲ら宥団偓骞垮灪閸╂稓鎲存担鐣屾闁挎稑鑻崢娑㈠触鎼存繆绀�120濞戞搩浜i、鎴炵▔濮樺磭孝閺夆晪鎷�20000閻庤婀圭槐鎺撶▔濮橆偆杩旈幖瀛樻煣閸楀酣宕抽…鎺旂鐎电増顨呴崺灞惧濡も偓椤︽寧瀵兼担椋庣懝闁靛棔鑳堕弫銈夊箣妞嬪孩鐣辨鐐村绾墽鎷嬮妶鍛濞戞挸姘︾粋鎰板箥椤戦敮鍋撻敓锟�

    闁崇厧娲g粭銏ゅ棘閻熺増顫嶅ù鐙€浜欑拹鐔煎炊閽樺鏁堕柛鐑嗗灟缁旀潙鈻旈妸銉ユ杸濞寸媭浜滃▍鎺楀嫉瀹ュ懎顫ら柛婵呰兌婢ф繈鏁嶇仦鐐殘闁告劕濂旂花鈩冩償閺冨倹鏆忓ù婊冪凹閸楀酣宕抽妸銈呭磿閻炴稏鍔戦弨銏ゅ船椤曗偓椤n偊宕洪悢鐑樼暠闁炽儲绮堢粭銏ゅ棘閻熺増顫嶅ù鐙€浜栭埀顒佺箓閹佳囨偋鐏炵儵鍋撻敓锟�

    闁崇厧娲﹂崹婊勭椤戣法鐟濆ù鐘叉噸鐠愮喖骞冮妸锕€绲瑰〒姘洴閻濐喚鎷归妸鈺佹闁靛棔绶氶悵顕€骞€瑜戦崗姗€鎯冮崟顒夋⒕婵炴潙顑勯崡搴ㄥ闯椤帞绀夐柛娆欑畱椤︾粯娼诲Ο缁樼畳缂備礁绻橀悰娆愮▔閺夎法妲i柕鍡曡兌濞n喗绌遍钘壩楅柡鍫灦閻濐噣鎯冮崟顐g闂傚啰鍠嶇拹鐔煎箖閵娿儱甯抽悹鎰嚀閺侇參宕ユ惔銏$疀闁告柡鍓濋弫顕€骞愭担纰樺亾閿燂拷

    同類產品
    地址:青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話:0532-86069117 83812497 83821263
    傳真:0532-88786387 網址:www.zhongqili.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號